Allcon 10+ Construction adhesive
Tested according to WATT 91 DIN EN 204 D4, very low emission (acc. to GEV-EMICODE EC1), bonds nearly all materials, single component, easy handling, solvent-free, resistant to weather and aging, resistant to many chemicals, frost-proof, usable with natural stone.
Benefits of use:
Use with standard caulking gun, can be put under stress after just 7 to 10 minutes, no primer required, replaces multiple other adhesives and glues, safe to use, always the right product to hand, opened cartridge can be used up to 10 months; unopened cartridge lasts up to 18 months, minimum wastage, can be painted and varnished, suitable for indoor and outdoor use.
Areas of application:
Bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plasterboards, foam (EPS), hard foam, acrylic, insulation and much more.
|Curing||approx. 3 mm Allcon 10 per 24 hours; approx. 70% surface bonding after 7 to 10 minutes; 100% cured after 30 to 45 minutes|
|Density||approx. 1,4 g/cm³|
|Tested||test report in accordance with DIN EN 204 D4 (waterproof gluing), according to WATT 91 (+80° C (+176° F))|
|Storage life||opened cartridge can be used for up to 10 months, unopened cartridge lasts for up to 1½ years|
|Skin formation time||approx. 3 minutes under standard conditions (+23° C (+73.4° F) / 50% relative air humidity)|
|Storage||dry, at room temperature|
|Gap bridging||approx. 1,0 cm|
|Temperature||resistant from -40°C to max. +80°C (short term: +120°C)|
|Processable||from +5° C to max. +40° C|